18 November 2026 · TopGuard, DVM Protech
The in-mould label vs sticker label question comes up whenever a plastic container maker looks at their decoration cost. Both put a printed graphic on a container, but they do it at different points in your process, and the right answer depends on your volume, your SKUs and whether you can change the moulding line.
An in-mould label is a pre-printed polypropylene film placed in the mould before injection. Heat and pressure fuse it with the container wall, so it becomes part of the container. A sticker label is a self-adhesive label applied after moulding, on a separate labelling machine.
A sticker label does not need a decorated mould or a change to the moulding process. It suits very short runs, many different SKUs on one container, or a line where you cannot touch the mould. The cost is a labelling step, an adhesive layer, and a silicone release liner left over after every label is applied.
If you cannot change the moulding process but want the sticker gone, heat transfer labels decorate a finished container on a separate machine. There is no label edge and no liner, only a spent carrier web. It suits mixed and shorter runs better than IML, which fits dedicated high-volume SKUs best.
Look at three things: volume per SKU, whether you control the mould, and how long the container sits on a shelf. High volume on a dedicated mould points to IML. Short runs or an untouchable line point to stickers or heat transfer. If your container is blow moulded rather than injection moulded, you need a different film, explained in blow mould label vs in-mould label.
Not sure which fits? Send us your container and volumes and we will tell you honestly, including when the answer is not IML.