18 November 2026 · TopGuard, DVM Protech
Membrane doors, mica sheets, stainless steel sheets, ACP sheets and UPVC profiles have one thing in common: the finish is the product, and a scratch or a patch of adhesive residue is a rejected piece. Surface protection film for membrane door, mica, SS sheet, ACP sheet and UPVC has to hold through cutting, handling, transport and installation, then peel off clean.
Surface protection film is a temporary, self-adhesive polyethylene film with a pressure-sensitive acrylic adhesive on one side. The engineering sits in the adhesive. Adhesion is chosen against two things: how smooth or textured the surface is, and how rough the process is.
The common trap is buying by price per kilo and getting one mid-tack grade for everything. It over-sticks on gloss and under-sticks on texture, and both failures look like a film problem when they are a specification problem.
These are starting points. Confirm every one on a trial with your actual surface.
Peel force rises the longer a film stays on. A grade that removes cleanly after two weeks can fight you after three months. Tell your supplier the real time between application and removal, not the time you hope for.
Standard grades are for indoor, short-term use. If sheets or profiles will sit outdoors, ask for a UV-stabilised grade. Do not assume an indoor film survives a site stack in an Indian summer.
Residue on removal is the most common complaint in this category, and it usually means the adhesive was wrong for the surface or the film stayed on too long. See our surface protection film (SPF) page for the range. Send us your material, finish and storage time and we will suggest a grade and send a trial roll.