18 November 2026 · TopGuard, DVM Protech
Paint buckets are one of the most common jobs for in-mould labels, and one of the least forgiving. A bucket is carried by its handle, stacked, stored and handled by dealers for months. If you are sourcing IML labels for paint buckets, most of what decides the result is settled before the first label is printed.
An in-mould label is a pre-printed polypropylene film placed in the mould before the plastic is injected. Under heat and pressure it fuses with the bucket wall and becomes part of it. There is no separate layer to peel, so no label lifts at the corner after three months in a warehouse, and the print survives moisture, oil and handling.
Because the label and the bucket are both polypropylene, the finished bucket goes into one recycling stream. There is no label-separation step. Decoration also happens inside the moulding cycle, so the labelling machine, the labour on that line and the adhesive all disappear from your process.
A supplier who quotes without asking these questions is guessing:
Paint brands care about colour. Artwork is printed by rotogravure, which holds deep solids and fine text. Shade and thickness stay steady between orders when the supplier makes its own IML film, rather than buying film in and printing on it. Ask who extrudes the film.
IML also makes SKU changes simple. Change the label stack and you change the SKU, with no re-tooling and no ink change on the line.
Most first-trial problems come down to three things: the wrong film for the process, the way the label is held in the mould, or label placement by the robot. Wrinkles and trapped air usually point at holding. A patchy or weak bond usually points at the wrong film. If you run blow moulding instead, read our note on blow mould label vs in-mould label, because the two films are not interchangeable.
Send us a bucket drawing or a sample part, and tell us the machine and resin. We will tell you what the label needs to be. You can request a sample from our Kundli plant.